BRANDING - RAVEN STUDIO
SIMPLE ENTERPRISE NETWORK
Scenario
Design a network in CISCO packet tracer to connect ACCOUNTS and DELIVERY departments through the following:
- Each department should contain at least 2 PCs.
- Appropriate number of switches and routers should be used in the network.
- Using the given network address 192.168.40.0, all interfaces should be configured with appropriate IP addresses, subnet mask and gateways.
- All devices in the network should be connected using appropriate cables.
- Test the connectivity between ACCOUNT and DELIVERY department -PCs in DELIVERY department should be able to ping PCs in ACCOUNTS department.
Subnetting
- Network: 192.168.40.0
- Number of departments: 2 (so we need 2 subnets)
- Subnet Mask: 255.255.255.128 or /25
- Block size: 128
Router Configuration Code
Router>
Router>en
Router#config t
Router(config)#int range gig0/0-1
Router(config-if-range)#no shut
Router(config-if-range)#exit
Router(config)#int gig0/0
Router(config-if)#ip address 192.168.40.1 255.255.255.128
Router(config-if)#int gig0/1
Router(config-if)#ip address 192.168.40.129 255.255.255.128
Router(config-if)#exit
Router(config)#do wr
Building configuration… [OK]
Account Department Devices Configuration
- PC0: IP 192.168.40.2, Subnet 255.255.255.128, Gateway 192.168.40.1
- PC1: IP 192.168.40.3, Subnet 255.255.255.128, Gateway 192.168.40.1
- Printer0: IP 192.168.40.4, Subnet 255.255.255.128, Gateway 192.168.40.1
Delivery Department Devices Configuration
- PC2: IP 192.168.40.130, Subnet 255.255.255.128, Gateway 192.168.40.129
- PC3: IP 192.168.40.131, Subnet 255.255.255.128, Gateway 192.168.40.129
- Printer0: IP 192.168.40.132, Subnet 255.255.255.128, Gateway 192.168.40.129
Ping Command Details
C:\>ping 192.168.40.2
Pinging 192.168.40.2 with 32 bytes of data:
Request timed out.
Reply from 192.168.40.2: bytes=32 time<1ms TTL=127
Reply from 192.168.40.2: bytes=32 time<1ms TTL=127
Reply from 192.168.40.2: bytes=32 time<1ms TTL=127